This is a product made of a white metal alloy.
For casting, vents and gates need to be added to the model. These will leave excess metal on the model, that needs to be trimmed away carefully with a hobby knife or sprue cutter for metal.
The model mould is made of two parts, that leave a mould line on the finished product where the two parts meet. Again, a hobby knife or mould line scraper should be used to remove this mould line.
These casting imperfections are production-related and do not represent a defect in the product.
Metal dust is a health hazard if inhaled into the lungs. Sanding and filing should only be carried out with appropriate protective equipment, such as a fine dust mask, and/or wet sandpaper.
Small and thin metal parts may be bend during handling and shipping. These can be carefully bend back into the correct position.
We use a release agent in the casting process of our models. Make sure to give them a wash in lukewarm water with a drop of dish soap and brush carefully with a toothbrush to get rid of remains of this release agent, otherwise, paint might not stick to the model as it’s supposed to.
Use super glue or two-part epoxy glue for assembly.

Manufacturer in the sense of the GPSR:
Bogwyrm Miniatures, LLC
Manufacturer Address: 20002 Dodd Blvd, Lakeville, MN, 55044, USA
Manufacturer Email: info@bogwyrm.com

GPSR Authorized Representative:
Simon Saier, Bichler Str. 4a, 82377 Penzberg, Germany.
Contact: tabletop-stuff.de/Informationen/Kontakt/
All consumer enquiries should be made to Bogwyrm Miniatures